The Wyvern 2000RS is a smart card operated timer. It is a sister product to the coin operated timer Wyvern 2000R and is similarly designed for security and flexibility. The smart cards are charged with cash or unit values by either a handheld programmer or PC programmer. The cards are rechargeable and can be over-printed with logos or sales messages. The Wyvern 2000RS can be programmed to work exclusively with a smart card or also with coins and tokens.
Peak and off-peak timing cycles are available as a standard feature and an auxiliary output is provided with a programmable run-on time. Both switched outputs are voltage free; this means the Wyvern 2000R can be used to switch a load operating from any voltage, not just mains operated equipment. The facility for the user to install a remote start/stop switch is included as standard.
The case of the Wyvern 2000RS is made from powder coated zintec steel. Power consumption of the timer is approximately 10W (at 230V AC). Loads of up to 1kVA (3A resistive) can be switched directly by the timer, which is typically five 100W incandescent or two 100W fluorescent lamps. Adding the 7kVA option increases the capacity up to a maximum of 7kVA (30A resistive), which is typically one 7kW shower or 12 fluorescent lamps.
|Fuses:||Type T HBC 250V breaking capacity, 20 x 5mm FS1 500mA; FS2 & FS3 3.15A|
|Colour:||White epoxy polyester powder case, blue moulded fascia|
|Time Intervals:||Programmable minutes & seconds or hours & minutes (99.99 Max)|
|Display:||0.6 inch high green LED|
|Dimensions:||H: 275mm W: 204mm D: 90mm|
|Case:||18swg mild steel|
|Lock:||Radial 8 pin with two keys|
|Cash Box Capacity:||400 coins of 23mm diameter x 2.5mm thick|