DMC/DMP Display Timer

Product Information

The DMC Display Timer is single coin or token operated timer accumulative timer where each coin inserted will add the programmed time to the time remaining. It is fitted with a digital display to show credit remaining. Time per coin or token may be set from one minute to 127 minutes. An alternative timing range of one second to 127 seconds is also available.

Its case is made from powder coated zintec steel. Power consumption of the timer is approximately 10W (at 230V AC). Loads of up to 1kVA (3A resistive) can be switched directly by the timer, which is typically equivalent to five 100W incandescent or two 100W fluorescent lamps. Adding the 7kVA option increases the capacity up to a maximum of 7kVA (30A resistive), which is typically one 7kW shower or 12 fluorescent lamps. A 12kVA option is also available which increases the capacity to a maximum of 12 kVA (40A resistive), which is typically a 10kW shower or 16 fluorescent lamps. A voltage free version of the DMC/DMP Display Timer is also available. This means that the timer can be used to switch a load operating from any voltage, not just mains operated equipment.

Earn 0 reward points with this purchase
Buy This Now
£0.00 £202.00 (ex VAT)

Model Selection

Input Voltage

Output Load Options

Coin Selection

Price Change: +£3.00
BSC Push Button: +£0.00

Optional Extras

The versatility of the Display Timer may be further increased with several optional extras:

DMP Match Play
Adding an optional key-operated over-ride switch converts the basic DMC Display Timer to a DMP Timer. This facility allows the output to be turned on permanently, which s useful for match tournaments on tennis courts and similar facilities, or for ease of servicing equipment.

Price Change
This additional functionality, which can be added to both the DMC and DMP timers, is a programmable feature that allows the operator to set the machine so that more than one coin or token must be inserted before the timer turns on. The number of coins or tokens required to start the timer can be adjusted from one up to 15.

DMC Push Button (Free Vend)
This version of the DMC Timer is a free vend timer controlled by push button instead of coins or tokens. To select this, please choose "NA - Free Vend" in the Coin Selection dropdown menu

Technical Specifications

Fuses:Type T HBC 250V breaking capacity, 20 x 5mm FS1 500mA
Colour:White epoxy polyester powder case.
Time Intervals:1 to 127 Minutes, in 1 minute increments
Display:3 digit 0.3 inch high red LED
Coin:Most worldwide currencies accepted and L1, L2, L4 or 007 tokens
Dimensions:H: 250mm W: 145mm D: 150mm
Case:18swg mild steel
Lock:Radial 8 pin with two keys
Cash Box Capacity:300 coins of 23mm diameter x 2.5mm thick
Related Products

The item has been added to your basket

Continue Shopping
Proceed To Checkout