BSC/BMP Non-display Timer

Product Information

The BSC Non-Display Timer is a competitively priced, single coin or token operated timer, which can be factory pre-set to suit coins of most currencies and tokens. The mechanical coin acceptor has a reject facility so that incorrect coins and jammed coins can be ejected. The time allowed per coin is variable, selection being by an internal switch. Time per coin or token may be set from one minute to 127 minutes. An alternative timing range of one second to 127 seconds is also available. In operation, each coin inserted will add the programmed time to the time remaining.

Its case is made from powder coated zintec steel. Power consumption of the timer is approximately 10W (at 230V AC). Loads of up to 1kVA (3A resistive) can be switched directly by the timer, which is typically equivalent to five 100W incandescent or two 100W fluorescent lamps. Adding the 7kVA option increases the capacity up to a maximum of 7kVA (30A resistive), which is typically one 7kW shower or 12 fluorescent lamps. A 12kVA option is also available which increases the capacity to a maximum of 12 kVA (40A resistive), which is typically a 10kW shower or 16 fluorescent lamps. A voltage free version of the BSC/BMP Non-Display Timer is also available. This means that the timer can be used to switch a load operating from any voltage, not just mains operated equipment.

Earn 0 reward points with this purchase
Buy This Now
£0.00 £172.50 (ex VAT)

Model Selection

Input Voltage

Output Load Options

Coin Selection

Price Change: +£3.00
BSC Push Button: +£0.00

Optional Extras

The versatility of the Non-Display Timer may be further increased with several optional extras:

BMP Match Play
Adding an optional key-operated over-ride switch converts the basic BSC Non-Display Timer to a BMP Timer.  This facility allows the output to be turned on permanently. This is useful for match tournaments on tennis courts and similar facilities, or for ease of servicing equipment. 

Price Change
This additional functionality, which can be added to both the BSC and BMP timers, is a programmable feature that allows the operator to set the machine so that more than one coin or token must be inserted before the timer turns on. The number of coins or tokens required to start the timer can be adjusted from one up to 15.

BSC Push Button
This version of the BSC Timer is a free vend timer controlled by push button instead of coins or tokens.

Technical Specifications

Fuses:Type T HBC 250V breaking capacity, 20 x 5mm FS1 500mA
Colour:White epoxy polyester powder case.
Time Intervals:1 to 127 Minutes, in 1 minute increments
Coin:Most worldwide currencies accepted L1, L2, L4 or 007 tokens
Dimensions:H: 250mm W: 145mm D: 150mm
Case:18swg mild steel
Lock:Radial 8 pin with two keys
Cash Box Capacity:300 coins of 23mm diameter x 2.5mm thick
Switching Capacity:1kVA standard, 7kVA or 12kVA optional
Related Products

The item has been added to your basket

Continue Shopping
Proceed To Checkout