The ET60 is 60A timer programmable from one second to 99 hours and 59 minutes. Standard features include digital display, resettable and non-resettable coin counter and dual or single coin operation. The time period may be set in minutes and seconds or hours and minutes mode. The ET60 also incorporates programmable pre-start waiting time and pre-end warning settings.
Its case is made from flame retardant, impact resistant ABS plastic. Power consumption of the timer is approximately 22W (at 230V AC). Loads of up to 14kVA (60A resistive) can be switched directly by the timer, which is typically 14kW of heating or 20 fluorescent lamps.
Please note that due to supply chain difficulties the ET60 is unavailable until further notice.
Key-operated Over-ride Switch
The versalitiy of the ET60 can be increased by fitting it with an optional key-operated over-ride switch which allows the output to be turned on permanently.This is useful for match tournaments on tennis courts and similar facilities or for ease of servicing equipment. When this option is selected the timer is referred to as a ET60K.
|Fuses:||FS1 Type T HBC 250V breaking capacity, 20 x 5mm 100mA|
|Time Intervals:||Programmable minutes & seconds or hours & minutes (99.59 max)|
|Display:||4 digit 0.6 inch high green LED|
|Coin:||£1, 20p, 10p, €1, €0.50, AUD1, BBD1 coins and L1, L2, L4 or 007 tokens|
|Dimensions:||H: 270mm W: 183mm D: 93mm|
|Case:||High impact ABS|
|Lock:||Radial 8 pin with one key|
|Cash Box Capacity:||100 coins of 23mm diameter x 2.5mm thick|