DPL Display Timer
Based on the DMC Display Timer, the DPL Display Timer is designed specifically for controlling washing machines that automatically lock when not receiving power. The DPL Display Timer provides a button on the timer which allows the user to supply power to the machine for 60 seconds to allow the door to be opened and the washing retrieved.
Its case is made from powder coated zintec steel. Power consumption of the timer is approximately 10W (at 230V AC). Loads of up to 7kVA (30A resistive) can be switched directly by the timer, which is typically one standard washing machine, one 7kW shower or 12 fluorescent lamps.
The versatility of the DPL Display Timer may be further increased with the addition of a price change option.
This additional functionality is a programmable feature that allows the operator to set the machine so that more than one coin or token must be inserted before the timer turns on. The number of coins or tokens required to start the timer can be adjusted from one up to 15.
|Type T HBC 250V breaking capacity, 20 x 5mm FS1 500mA
|White epoxy polyester powder case.
|1 to 127 Minutes, in 1 minute increments
|3 digit 0.3 inch high red LED
|Most worldwide currencies accepted and L1, L2, L4 or 007 tokens
|H: 250mm W: 145mm D: 150mm
|18swg mild steel
|Radial 8 pin with two keys
|Cash Box Capacity:
|300 coins of 23mm diameter x 2.5mm thick