Contact Us | Log In | Register

Sales:
+44 (0) 1258 489075
sales@lcigb.com
Technical:
+44 (0) 1258 483574
support@lcigb.com
Leisure Controls International
New £1 Coin

New £1 Coin

The Royal Mint will be introducing a new £1.00 coin into circulation in March 2017. There will be a six month period when the existing £1.00 and the new £1.00 coin will co-circulate.

The existing £1.00 coin will begin to be withdrawn from circulation when the new coin is introduced in March 2017.

From September 2017 the existing £1.00 will no longer have legal tender status.
ie they will not be accepted by banks, shops, etc.


LT3100 & ET30

LT3100 & ET30

There are two types of conversions for these meters depending on the age of the meter.

LT3100

If the serial number of your LT3100 starts with LA or the serial number is before LT-052190 you will need to order the Pre 2011 conversion kit. This has a part number of 964-001-072-000 and a cost of £10.00 (Per conversion, Plus carriage and VAT).

If the serial number of your LT3100 is greater than LT-052190 you will need to order the post 2011 conversion kit. This has a part number of 964-001-072-001 and a cost of £5.00 (Per conversion, Plus carriage and VAT).

ET30

If the serial number of your ET30 is before ET-0314115 you will need to order the Pre 2011 conversion kit. This has a part number of 964-001-072-000 and a cost of £10.00 (Per conversion, Plus carriage and VAT).

If the serial number of your ET30 is greater than ET-0314115 you will need to order the post 2011 conversion kit. This has a part number of 964-001-072-001 and a cost of £5.00 (Per conversion, Plus carriage and VAT).

All conversion kits will come with full instructions.

Once this conversion has been done it will only accept the new £1


Wyvern Standard Meters

Wyvern Standard Meters

The Wyvern Standard meter will require the coin acceptor and safety plate to be changed. This has a part number of 964-001-073-000 and a cost of £36.00 (Per conversion, Plus carriage and VAT).

All conversion kits will come with full instructions.

Once this conversion has been done it will only accept the new £1


Wyvern 2000

Wyvern 2000

There is no conversion kit needed for this coin meter, just program a vacant coin slot. The new £1 coin can be 'learnt' in the vacant coin slot and the meter will then accept both the old and new £1 coins.


Conversion kits will be available for all meters during March 2017. Click here for instruction manual.

This page was last updated: 21/03/2017